ACS110-7SB2 |
RFQ for ACS110-7SB2 Required Field |
 |
| Product | Manufacturers | Pack | D/C |
| ACS110-7SB2 | - | - | 05/06+ |
The ACS110 belongs to the AC line switch family built around the ASD™ concept. This high performance switch circuit is able to control a load up to 1 A.
The ACS™ switch embeds a high voltage clamping structure to absorb the inductive turn off energy and a gate level shifter driver to separate the digital controller from the main switch. It is triggered with a negative gate current flowing out of the gate pin.
Typical Application |
Features |
| · AC static switching in appliance control systems· Drive of low power high inductive or resistive loads like- relay, valve, solenoid, dispenser- pump, fan, micro-motor- defrost heater | `Blocking voltage : VDRM / VRRM = +/-700V`Avalanche controlled : VCL typ = 1100 V`Nominal conducting current : IT(RMS) = 1A`Gate triggering current : IGT< 10 mA`Switch integrated driver`High noise immunity : static dV/dt >500V/s |
|
Symbol |
Parameter |
Value |
Unit | ||
|
VDRM /VRRM |
Repetitive peak off-state voltage | Tj = 10 °C |
700 |
V | |
|
IT(RMS) |
RMS on-state current full cycle sine wave 50 to 60 Hz | SOT-223 | Ttab = 105 °C |
1 |
A |
| DIL-8 | Tlead = 110 °C |
1 |
A | ||
|
ITSM |
Non repetitive surge peak on-state current Tj initial = 25°C, full cycle sine wave |
F =50 Hz |
8 |
A | |
| F =60 Hz |
11 |
A | |||
|
I2t |
Fusing capability | tp = 10ms |
0.35 |
A2s | |
|
dI/dt |
Critical rate of rise of on-state current IG = 10mA, tr < 100ns | F = 120 Hz |
50 |
A/s | |
|
VPP |
Non repetitive line peak pulse voltage | note 1 | |||
